LT1-LT4 Modifications 1993-97 Gen II Small Block V8

Car died when brake/ebrake pressed now no power to the car at all

Thread Tools
 
Search this Thread
 
Old 03-23-2013, 02:02 PM
  #1  
TECH Apprentice
Thread Starter
 
jrwilliams95z28's Avatar
 
Join Date: Jun 2012
Location: Mississauga Ontario Canada
Posts: 372
Likes: 0
Received 0 Likes on 0 Posts
Default Car died when brake/ebrake pressed now no power to the car at all

hey, as the title says, I just started the car after winter storage, I relocated the battery to the truck but as soon as I started it, it fired up no problem idled for about 30min until it was warm then I went to move and i pressed the brake and dropped the ebrake at the same time and the car just quit.

I couldent restart the car and there is no power to anything when I turn the key over.
I measured 12.54V accross the battery, the fuse tested good.

One thing to mention is that i left the old battery in the car over the winter and it was bone dead so I am not sure if this is a VATS issue or what.

Anyone have any information??
Old 03-23-2013, 04:38 PM
  #2  
TECH Apprentice
Thread Starter
 
jrwilliams95z28's Avatar
 
Join Date: Jun 2012
Location: Mississauga Ontario Canada
Posts: 372
Likes: 0
Received 0 Likes on 0 Posts
Default

ok figured it out. it was a bad ground. I moved the ground to the main passenger side rear seatbelt bolt and it works great now.
Old 03-23-2013, 08:14 PM
  #3  
Launching!
iTrader: (3)
 
tonskiguy's Avatar
 
Join Date: Jul 2007
Location: Greenville, WI
Posts: 231
Likes: 0
Received 0 Likes on 0 Posts

Default

That was easy



Quick Reply: Car died when brake/ebrake pressed now no power to the car at all



All times are GMT -5. The time now is 07:05 AM.