SPOOLED UP

iTrader: (2)

Pix
Part number
Location of install

Twin turbo c5

I''ll post you up some pics tonight . I'm running alky control on my corvette and I've got a aem kit on my Fairmont. The alky control is a better kit but more money.

BMF_Racing

iTrader: (6)

No pix at the moment but I have used Snow Performance stg2 kits on many builds and love them, they all worked great and had no issues. I install the nozzels about 2" from TB. Alky Control is another great brand. Good luck.

Snow Part# 20010
$450 ish new

607motorsports

iTrader: (6)

I've been running Devilsown kits on my cars for years now without any issues. Currently running a 2 bar progressive kit on my boosted SS.

I think I paid around $350 new

Detoxx03

iTrader: (14)

I'll add pics later but I have a dual nozzle Alky Control kit.

Slowhawk

iTrader: (12)

We only run Alky control and I run the dual nozzle kit on our shop car.

Part location is up to the kit.

ls1curt

iTrader: (31)

Im running the Alky Control as well with dual nozzles. Heres some pics of where I mounted the pump.

Custom bracket for pump.



dual nozzles




controller in front of shifter

Detoxx03

iTrader: (14)

Only have one good pic of nozzle location (shout out to stangkilr for taking this at TX2K13). The nozzles are mounted after the maf and before the iat. The pump is in the inner fender well on the drivers side.

Realcanuk

Alky control...you won't find better quality or service than Julio will give you.

02sleeperz28

iTrader: (26)

Alky Control

I8UR4RD

iTrader: (16)

as far as top end kits. alkycontrol is very nice. i think it has nicer materials in it than the aquamist, but the aquamist is a little more advanced in that it uses and injector style nozzle based off (i think) IDC or fuel pressure. one of the two.


as far as the cheaper kits

I think the devils own is top notch for the price.

itsslow98

iTrader: (18)

I have an Alcohol Injection Systems 3 gallon trunk mounted kit. I have zero complaints. Alky control is top notch as well there is no doubt about that.

SPOOLED UP

iTrader: (2)

any pix of your setup?
what part number kit?

MUSTANGBRKR02

iTrader: (91)

I use a Alky Control unit. Kit is 7 years old and still works perfectly.

mrstepheneades

Alcohol Injection Systems Trunk Mount Kit with Twin 10lb per hour nozzles

VINCE

iTrader: (1)

Alky Control Baby!!!!!

The Alchemist

iTrader: (19)

I run the Aquamist kit and love it. I have the pump mounted on the bracket for the radiator up front in front of the windshield washer reservoir.

ZNix

iTrader: (1)

AlkyControl here. Julio is the man!

SPOOLED UP

iTrader: (2)

nice kits

Blackpanther99

iTrader: (8)

No running Meth kit here yet, but ill be using Snow's Stage 3 kit. Lets see how it goes if not ill be going for the Aquamist.