Foose Nitrous 2 Need help on sizing!
#1
Teching In
Thread Starter
Join Date: Feb 2012
Location: Grande Prairie, Ab, Canada
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Foose Nitrous 2 Need help on sizing!
Looks like I'm getting a nice refund on my taxes and want to order a set of these for my 99 WS6. I was going to go with 17x8 and run 275-40r17 on the front and on the back was going with 17x10 with 305-35r17. I was wanting to go with +38mm offset but they are asking for the backspacing.
First, if I go with this setup, will it set up properly, I know there may be issues with having to roll a fender, but as far as sticking out too far will these look correct.
Second, as far as I can figure from looking at the stickies, the front should be a 6" backspacing and the rear a 7"? Besides having them sit nicely the biggest thing I'm after is a nice deep lip on the rear.
Any help you guys can give me on this would be greatly appreciated.
First, if I go with this setup, will it set up properly, I know there may be issues with having to roll a fender, but as far as sticking out too far will these look correct.
Second, as far as I can figure from looking at the stickies, the front should be a 6" backspacing and the rear a 7"? Besides having them sit nicely the biggest thing I'm after is a nice deep lip on the rear.
Any help you guys can give me on this would be greatly appreciated.
Last edited by neztroeg; 04-16-2013 at 02:07 PM.
#2
Teching In
Thread Starter
Join Date: Feb 2012
Location: Grande Prairie, Ab, Canada
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I should also add that right now its stock suspension and height but am also looking to go with Strano/konis in the future along with some umi stuff.