Charging issues in new build
04-22-2013, 07:55 PM
#1
Teching In
Thread Starter
Join Date: Dec 2012
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Charging issues in new build Help please.
I just installed a crate LS3 motor with new custom harness and everything works, car starts and runs but the alternator is not charging. There is no power going to the wires that plug in at the top of the alternator.
I am pulling my hair out trying to find the problem as everything looks correct and connected properly.
Is there a way I can by-pass the custom harness and wire the alternator up directly to power source to see if it works and is indeed a wire harness problem?
I aprreciate any suggestions.
Gobs.
I just installed a crate LS3 motor with new custom harness and everything works, car starts and runs but the alternator is not charging. There is no power going to the wires that plug in at the top of the alternator.
I am pulling my hair out trying to find the problem as everything looks correct and connected properly.
Is there a way I can by-pass the custom harness and wire the alternator up directly to power source to see if it works and is indeed a wire harness problem?
I aprreciate any suggestions.
Gobs.
