BottleFedZ346

iTrader: (17)

Might be a stupid question, but what's the fastest cam only stock bottom LS on spray?

Just curious as to how i rank up with the big dogs, is it still Cam?

Thanks!

itsslow98

iTrader: (18)

Im pretty sure I just saw a thread with a 9.13. First time at the track and he thinks itll go 8s when he ups it from a 250 shot.

Noyzee

iTrader: (37)

https://ls1tech.com/forums/nitrous-o...rous-list.html



All info is listed above.
Stock motor I think I hold record 9.34 but I have stock ls6 heads and a custom can

Cam went 9.36 I think that is with stock ls1 heads and custom cam

blacktransam

iTrader: (13)

In what car is the question, brandun theres a local car in the 8's but it's a light weight RX7. And a pipe rack that runs bracket nights in the bottom 8's as well, with a stock long block 6.0 with a cam and spray

Killer5.3

iTrader: (1)

You have a mustang with LS swap. There is a specific list for your car.

THADD

iTrader: (12)

It sounds like you are talking about my car. I am stock cubic inches, 346, but it was a stock block, stock crank, with aftermarket rods and pistons with heads

BottleFedZ346

iTrader: (17)

Hmmm, where is said list? lol

SofakingFast85

It shouldn't be a list by car it should be by weight.

itsslow98

iTrader: (18)

Yep, my bad....too many records nowdays! lol

Killer5.3

iTrader: (1)

I am not a moderator or forum owner so I don't make the rules on that. The lists are stickied on the top of 1st page of nitrous forum.

minytrker

iTrader: (13)

I have the fastest b4c pewter camaro from Burton!

BSmiff

Stock bottom end record is Cam.
Stock cube record is Thadd.

Both nitrous both stock suspension both auto both fbody both high 5s in the 1/8th. Class dismissed.

BottleFedZ346

iTrader: (17)

Hmmmm, im not to far off Cam, just not in a f-body......

BSmiff

Cam and Thadd don't have 6.0s though. Not sure what the 6.0 record is but you could lump it all together just by saying Gen III and IV.

THADD

iTrader: (12)

Fbody and 346 FTW! Lol. I believe Cam ran a 5.9x and I went a 5.70 in the 1/8

camscam02

iTrader: (21)

I went 1.35 5.87 118 to the 1/8, nothing close to that 5.70 though. Flying

shortdog

iTrader: (1)

I don't think there's a list for hybrids, but I do get what you're saying.

If the motor didn't come with the vehicle, how will that be considered "stock?"

Good thing I'm not moderator, cause there will be some upset people here.

THADD

iTrader: (12)

I assume that was geared towards me and I understand why you say that. But an LS swapped into a mustang is one thing but if if is swapped into a LT1 Camaro and the only difference is the front bumper and headlights then I don't see that being an issue what so ever. Hell stock for stock the LT1 car is heavier

shortdog

iTrader: (1)

^Actually, it wasn't geared toward you. I was referring to NON f-body/vette cars that weren't equipped with ls motors in the first place. BUT, 93-97 f-bodies didn't come equipped with ls1s neither. A stock cube lt1 running those times would be even more impressive imo..

twinturbo2

iTrader: (16)

LSx-Hybrids


1-8.70@145--1.27--250--Sho-Me Speed--92 Mustang--Glide--8/19--Hoosier 26x8.5
2-8.84@152--1.26--250--twinturbo2--Mustang--turbo400--9/29--Hoosier DR--Post #86
3-8.99@147--1.27--250--Mactizen--84 RX-7--TH400--9/8--28x10.5 ET street --Post #75
4-9.08@142--1.34--175--JRracing--93 mustang--th400--9/8/12-- Hoosier 325/50
5-9.84@137- 1.46--125--richard david--93 mustang--turbo350--mt26x10--Post #47