Tire and fitment question
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jan 2012
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Tire and fitment question
I just got a set of TSW cray scorpions for my car. These wheels came off of a C6 vette, but going on a 98 T/A. My question is what spacer do I need, and what would be the best tire size to work on this set up? The front wheels are 18x9.5, and the rear wheels are 19x10.5. My car is lowered with BMR 1.25 springs.
Thanks in advance
Thanks in advance
#2
Launching!
Join Date: Apr 2011
Location: orbiting caprica
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
i was actually looking for the fitment on some staggered vette wheels for my ws6...dont have them on it yet.
im looking for tires now. these are the size that are supposed to be on them:
245 40 18
285 35 19
im looking for tires now. these are the size that are supposed to be on them:
245 40 18
285 35 19
#3
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jan 2012
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
I think my wheels are a half inch wider than factory though. So wouldnt I need a wider tire, and spacer? I would like to have the side walls the same, not a a fatter tire in the front. I think it lookes kinda funny that way. Could I do 275/30/18 front 295/30/19 rear?
#6
I used this thread to do some of my research. There is plenty out there and I see contradictions from site to site.
https://ls1tech.com/forums/wheels-ti...must-read.html