Question for the toyo tq guys
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Apr 2009
Location: lancaster ny
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Question for the toyo tq guys
Hey guys, I'm going to be ordering 315/35/18 tq's for my c5 dd wheels and my question is: can I get those tires and wheels to work on the rear of my ws6 without rolling the fenders? I will bfh whatever I need to, I'll cut the bumpstops but I just don't want to have to roll my fenders. I've got stock ws6 wheels on now with 315/35/17 nitto 555r's. I know the tq's are gonna be wider but only by less than half an inch. If I can't squeeze them in there without rolling the fender, I may go with something else but I really don't want to. Let me know guys. Any input is appreciated. Thanks.
#2
mine rub, I need my fenders rolled. hard cornering or with a rear passenger they rub. im gunna mess with my adjustable panhard bar, but pretty sure they already rub both sides. just more on the left. my 315 sumitomes didnt rub as bad as these. hopefully you arent putting these tires on the ws6 wheels, cause they're too big. Nittos are already pushing it, and theyre pretty narrow....
#3
Launching!
Thread Starter
iTrader: (2)
Join Date: Apr 2009
Location: lancaster ny
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
No, I've got 18x10.5 c5 chrome dd wheels from oe wheels to put them on. I've got an adjustable pan hard bar also. I'm at stock ride height, are you lowered sail hatan?