Fuel pump dilemma. Weldon vs Magnafuel
#1
Teching In
Thread Starter
Join Date: Apr 2013
Location: Miami, FL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Fuel pump dilemma. Weldon vs Magnafuel
Had my mind set on Magnafuel's 4303 pump for my turbo JY 5.3 98 S10 swap but seeing as they're out of stock indefinitely because of an issue with magnafuel's gear manufacturer, I'm leaning towards a Weldon D2025A as I can get it for about $50 more than the retail price of a Magnafuel 4303.
Help me out please. Goal is to make 700-800 on e85 and 1000 later on when I get bored of the power. I know from first hand experience how loud the Weldon 2025 is and I've heard the 4303 is quieter which is what I'd want as the truck is going to be mostly street driven.
Help me out please. Goal is to make 700-800 on e85 and 1000 later on when I get bored of the power. I know from first hand experience how loud the Weldon 2025 is and I've heard the 4303 is quieter which is what I'd want as the truck is going to be mostly street driven.
#4
Teching In
Thread Starter
Join Date: Apr 2013
Location: Miami, FL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I'm sure there is but I get these pumps at cost which is well below what they go for regularly. I'll most likely end up going with the Weldon and be done with it.
Also, dont flame me but I REALLY wanted the Magnafuel because of cost AND the fact that its anodized purple and will match with my purple ano fuel rails, wiggins clamps, wastegate, bov, AN fittings, and FPR. lol
Also, dont flame me but I REALLY wanted the Magnafuel because of cost AND the fact that its anodized purple and will match with my purple ano fuel rails, wiggins clamps, wastegate, bov, AN fittings, and FPR. lol
#5
Teching In
Thread Starter
Join Date: Apr 2013
Location: Miami, FL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
i know the bigger Weldon pumps require a controller for street use.