Building a roots blown ls
#1
Registered User
Thread Starter
Join Date: May 2013
Location: Australia
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Building a roots blown ls
Hey guys, new to LS engines so be gentle :-)
I'm currently in the process of building a car for burnout comps here in Australia.
Plan is 6/71 or 8/71 running methanol, and I'm looking for around 800hp at the engine. My problem is I'm not really sure whether I should buy something like this: http://www.crateenginedepot.com/LSX3...50811C556.aspx
Then throw in a roots blower spec cam, bolt the blower on and go.
Or should I start with a complete L98, add a forged rotating assembly (callies etc) get the heads worked, blower cam, blower. I know it's a pretty broad question sorry.
Thanks heaps
I'm currently in the process of building a car for burnout comps here in Australia.
Plan is 6/71 or 8/71 running methanol, and I'm looking for around 800hp at the engine. My problem is I'm not really sure whether I should buy something like this: http://www.crateenginedepot.com/LSX3...50811C556.aspx
Then throw in a roots blower spec cam, bolt the blower on and go.
Or should I start with a complete L98, add a forged rotating assembly (callies etc) get the heads worked, blower cam, blower. I know it's a pretty broad question sorry.
Thanks heaps