Detonation?????
#1
Teching In
Thread Starter
Join Date: Apr 2013
Location: Blue Springs, MO
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Detonation?????
Hey everyone in the process of putting my 5.3 back together I cleaned the pistons up and have two that i think are bad. One has a bunch of pitting on one side and the other has one big pit in it. Was this probably caused by detonation and can i just get two used pistons to put back in? Its a LM7 out of an 03 so not sure if its normal or if the motor had something wrong with it. Also if i can just get a couple of different pistons where should I look? I tried ebay but no luck...Thanks and please help.
#3
Teching In
Thread Starter
Join Date: Apr 2013
Location: Blue Springs, MO
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Teching In
Thread Starter
Join Date: Apr 2013
Location: Blue Springs, MO
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
#11
Teching In
Thread Starter
Join Date: Apr 2013
Location: Blue Springs, MO
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
#16
TECH Addict
iTrader: (6)
To me this is what forums are all about...showing off your ride, sharing information and helpikng other enthusiasts out. Seems lately they have turned into a troll fest and place where people come to slam each other. I try to do my little part to help and folks have helped me out in the past as well.
#18
Teching In
Thread Starter
Join Date: Apr 2013
Location: Blue Springs, MO
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
So is there another way to get pics on here other then photobucket? It will not upload pics. And has anyone reused their rod bolts? thanks again.