Havasutom

After only 2 HPDE track days with NASA I had cracks in both of my front rotors. The rears still showed the cross hatch machine lines. I know I was using the brakes hard , but I think the rotors should last longer than this. What rotors have you others used with better results?

ls1 1990 VN

I have been using DBA 'Disc brakes Austalia' they are heat treated but after one evening of 5x5 laps i can see the start of small heat cracks so I know they will only last one decent meeting before a rotor ends up with a decent crack that will require a rotor replacement, pissed off they don't last long enough

1981TA

iTrader: (7)

Wilwood in front (complete aftermarket setup), EBC in back (1998-2002 f-body directional slotted rotors), no signs of stress anywhere.

FASTFATBOY

iTrader: (23)

Small cracks are normal.

jcsperson

The only thing you'll go through faster than rotors is gasoline.

ls1 1990 VN

Trouble is that once they are there I know they will get bigger as the rotor is already compromised.
From past experience I will get only one more meeting before having to replace them 'AGAIN' this will be the 5th set.

FASTFATBOY

iTrader: (23)

http://forums.corvetteforum.com/auto...tors-hpde.html