PowerTorque (Oreilly) or NAPA Slave Cylinder?
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2013
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
PowerTorque (Oreilly) or NAPA Slave Cylinder?
First off, I know that this has been brought up a lot but my question is specific to the two parts listed as the post thread title.
So I got a Tick's Master and I know for sure the current slave is blown. In Hawaii I can only find these two slave cylinders available pronto.
For some reason upon calling the stores they cannot say if the cylinder has the AP logo that I am looking for so I will just list what I can find out and get some recommendations from everyone on the site.
1. PowerTorque (O'Reilly)
Cost: 76.99
Warranty: Limited Lifetime
2. NAPA
Cost: 69.99
Warranty: 12 M or 12k Miles
If anyone knows that one of these is AP Branded that's the one I want, otherwise I'm thinking of sticking to O'Reilly because of Availability and Location.
Any words of advice?
So I got a Tick's Master and I know for sure the current slave is blown. In Hawaii I can only find these two slave cylinders available pronto.
For some reason upon calling the stores they cannot say if the cylinder has the AP logo that I am looking for so I will just list what I can find out and get some recommendations from everyone on the site.
1. PowerTorque (O'Reilly)
Cost: 76.99
Warranty: Limited Lifetime
2. NAPA
Cost: 69.99
Warranty: 12 M or 12k Miles
If anyone knows that one of these is AP Branded that's the one I want, otherwise I'm thinking of sticking to O'Reilly because of Availability and Location.
Any words of advice?
#4
Registered User
Thread Starter
iTrader: (1)
Join Date: Apr 2013
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for telling me that BAD. I did enough research to find out that I wanted an "AP" slave just couldn't get a clear word from the store before taking the time to find out.
Bought the part from NAPA today now time to drop the tranny.
Blown97 I will keep that in mind. Thanks for the advice.
Bought the part from NAPA today now time to drop the tranny.
Blown97 I will keep that in mind. Thanks for the advice.