tired2valve

I have a question. It might be a question that had been asked before but is there a way you can go into the Ecu with hp tuners or any other tuning software at that could you program a different vin into the Ecu?
It would be nice to go to the inspection place and when they scan the car it sees its a mustang vin then the Chevy vin.

Any info on this?

LS79CAMARO

iTrader: (7)

What do you want to do? You want to put the Ford vin in the GM ecu? I see in HPTuners where you can change the vin but not sure about it letting you do it like that.

tired2valve

Correct I want to put the ford vin in the gm Ecu.

LS79CAMARO

iTrader: (7)

From my HP Tuner interface
Change VIN Rules
The following checks are in place when using the Change VIN function:

You must have support for the vehicle you are modifying.
You must have support for the new VIN you are trying to write.
The new VIN must be valid and must qualify for the OS currently found on the VCM.

Looks like it could be done

Krom

Several sponsors can do it, and AFIK so can EFI Live

Ed Wright

iTrader: (1)

OBDII Tunercat will do that.

tired2valve

Sweet guys thanks!