Drivetrain Issues
05-31-2013, 03:59 PM
#1
Teching In
Thread Starter
Join Date: May 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Drivetrain Issues I suppose I should start off with my mods. LG Motorsports G5X3 cam, under drive pulley, k&n intake, kooks headers w/ cat less mids, corsa sport catback, monster stage 3 clutch w/ billet flywheel, b&m short shifter, and GForce stage 2 half shafts.
I had my pilot bearing replaced 2 years ago due to it shattering. After replacement the car ran like a champ. Got an inspection last month and found the driveshaft carrier bearing was ripped an we could shake it around in a circle. I was saving money for a GForce 4 inch aluminum replacement when the car started acting like crap. Started to grind when putting it in second like the clutch wasn't disengaging all the way. It shouldn't be the pilot bearing again because I replaced it with a bronze replacement. I want to know what it could be before I spend the money on dropping the tranny and having it looked at. Pilot bearing again? Maybe syncros, slave or master clutch?
I had my pilot bearing replaced 2 years ago due to it shattering. After replacement the car ran like a champ. Got an inspection last month and found the driveshaft carrier bearing was ripped an we could shake it around in a circle. I was saving money for a GForce 4 inch aluminum replacement when the car started acting like crap. Started to grind when putting it in second like the clutch wasn't disengaging all the way. It shouldn't be the pilot bearing again because I replaced it with a bronze replacement. I want to know what it could be before I spend the money on dropping the tranny and having it looked at. Pilot bearing again? Maybe syncros, slave or master clutch?
