LS 3 intake question
06-03-2013, 06:26 AM
#1
LS 3 intake question i have an LS3 intake (and heads) on my LQ4, and plumbing the diff vacume lines-i have an LS6 valley cover, prob use that for the PCV valve
on each side where the throttle body is, there is a vac nipple on both sides
i can fit a vacume hose on either, but they dont have a barb like most-is there a special fitting the factory used, kind of like the fuel line
on each side where the throttle body is, there is a vac nipple on both sides
i can fit a vacume hose on either, but they dont have a barb like most-is there a special fitting the factory used, kind of like the fuel line
