allan808

iTrader: (3)

Im looking for 500whp on cam only,anyone have any info on these cams? Theres alot of info on the night fury cam but no results on the tsp 235/239.

allan808

iTrader: (3)

Nobody?some one got to have the tsp cam with results?

5.0 LsX

iTrader: (7)

need a lot more info....whats you set up?

allan808

iTrader: (3)

New ls3 going in a 98 fbody auto 3600/4000 stall...heads will be ported..street/ strip car..

allan808

iTrader: (3)

Anybody?

armyboyatc

iTrader: (29)

Call Martin at tick and have him spec one out for you man. That's your best bet.

litle88

iTrader: (20)

Compression ratio? who ported? Th400? 4L60/4L80? Stock 10 bolt, moser 12 bolt, 9" Dana 60?

What intake manifold?

If your looking for 500rw and you have these to choose from, I'd go night fury all day long.

allan808

iTrader: (3)

Landspeed will cnc my heads..compression will be stock may mill. 20 not sure yet and trans will be 4l60e..rearend will be stock for a short time.intake will be stock unless I can get a good deal in a fast.

litle88

iTrader: (20)

Mill them you'll need the compression to get there. I believe lethal also goes down to 20thou, but call and ask. Hope you have 1 7/8 headers or bigger lol.

FYI On my build with the DMH cutouts closed were costing me 20 to 30 hp throughout the rpm range using the magnaflow CB. The sound of them open Is amazing and I love it.
With the stock 10 bolt I wanna say you'll be 470/480 and the NF cam.

SS SLP2

iTrader: (8)

Good luck with the build, should be nice but don't sound like a "cam only"
how ever in "street" the one who lies the best/most has the most fun .
Johnny

Sales@Tick

iTrader: (3)

Let me know if I can help in any way.

BODUKE

I have a ls3 swap cam only. I am also running a yank ss3600. It really moves out.

Alvin@PCMofNC

Uggh.. 500 rwhp cam only LS3's really feel lazy down low. They give up so much bottom end that the car feels soggy. That is my opinion as a guy who has driven just about every combination under the sun.

Look at some of our LS3 cam results.

http://www.pcmofnc.com/index.php/blog/42-builds/167-kel
http://www.pcmofnc.com/index.php/blo...-a-cam-package
http://www.pcmofnc.com/index.php/blog/42-builds/166-w