Jakson

iTrader: (50)

Category: Engine - Intake/Fuel
Price: $465
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): MN
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

FIC 1000CC injectors, LS3/7/9 short length. They flow 107LB @ 58PSI as shown on the flowsheet. They have dyno time only on E85, after the dyno session they were removed and cleaned/checked on an injector machine. They are like new. I have EV1 adapters as well. *SOLD*




Powerbond 25% Underdrive, also only has dyno time with a few cam swaps involved, so it has a few blemishes, but functions as new! Also have an ARP bolt to go with it if you would like. SOLD

I8UR4RD

iTrader: (16)

the $145 listing is misleading.

Jakson

iTrader: (50)

My price on the pulley is $145 without the ARP bolt. Thanks for the bump though. Maybe you should go call out the folks with the price on their ads as "$0, $1, or $12456" instead, that might be a bit more effective.

Jakson

iTrader: (50)

Bump up TTT!

11z71

iTrader: (10)

You sir have a pm.

Jakson

iTrader: (50)

Pulley/ARP bolt sold to 11Z71! Injectors still available!

BadV8S10

Would the work on victor jr on 6.0l with 317's

02_ramair_ta

iTrader: (35)

PM sent.

Jakson

iTrader: (50)

It would depend on your fuel rails as far as bolting in. If you have LS1 length injectors now, you would need injector spacers for these to work. Or shorten up your fuel rail brackets to drop the rail down.

PM's returned!

Jakson

iTrader: (50)

Bump TTT. Plenty of PM's, no takers yet!

Jakson

iTrader: (50)

Up once again, need these gone! Someone could use a set of big injectors to make some HP. I was making 1100 flywheel on E85 with room for more!

98_SS

iTrader: (2)

pm sent