turby57

Going to stuff a 5.3 and turbo 350 in 91 s10 tonight after work. I was wondering if the stock manifolds will work. Picked up a tci flywheel spacer today, next thing I have to figure out is how to mount the procharger. I got a emailed copy of install manual for a 5.3 from procharger today, so that will help with location, and belt, intercooler. This is gona be fun!!!

Tuckin15s

iTrader: (10)

Stock 5.3 truck mani's will not work you will have to track down some f-body manis and just recommending but i would weld some v bands on them to eliminate a pain in the *** install. On another note really looking forward to the procharger install on a s10 I have been tossing around the Idea of a procharger for some time.

jgb454ss

In for results

hellbents10

iTrader: (10)

I will ask Chad to post his S10 blazer pics on here. He had a 2003 2 door 2wd with a non ic E85 and p1. Went 12.0@122-3 if I remember right on 8-9psi.

turby57

Thanks guys for the input, I need as much help as possible with this, first time i have ever messed with a supercharger. I had a s 10 with a 355 before but it wouldn't hook. This one has a narrowed 12 bolt and a 390 posi, with a built 350 turbo trans. I also need to find out what is involved with the carb needing to be a blow through????? Thanks again for the help! Chad will post pics if I can figure out how

turby57

turby57

I found a set of shorty camaro headers today for 100.00 do you think they would work