GoPro: Bolt On Camaro vs Cam'd Coyote
06-24-2013, 04:53 PM
#1
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: Huntington, WV
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
GoPro: Bolt On Camaro vs Cam'd Coyote Friendly race vs one of my buddies. In fairness before anything else, I had ET Streets 26X10.5 with GTO spares and he had heavy *** 20s all the way around with 315 NT05s. His car ahs a forged shortblock, boss intake and "stage 3" comp cams, 3.73 and full exhaust. I have LTs/ORY/open cutout, 4.10, lid, udp, and a tune, that's all, still have a damn LS1 intake. It was uber hot that day, around 90 degrees. He was running high 8's I was running 8.1x. He has been a best of 7.7x's I believe with a 28" slick. My best is 7.85 on the same tire setup as above. Oh well this is the result, sorry for not putting the camera in a better place, my first time fooling with a gopro.
On the same dyno on the same day I put down 343/340 and he did 440/345 FWIW
On the same dyno on the same day I put down 343/340 and he did 440/345 FWIW
Last edited by b0b; 06-24-2013 at 05:27 PM.
06-24-2013, 07:56 PM
#3
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: Huntington, WV
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
No that's what it actually did.. Iono if its the tune, the cams, or the boss intake that makes it gutless but it doesn't start pullin til about 5k
06-30-2013, 01:51 AM
#6
not bad . guess I was expecting more out of the mustang. a good friend of mine swears that with just long tubes, tune & cai the 5.0 mustangs are making 500 rwhp. and cammed versions are making 575 rwhp.
