ToxicWS6

i have a 5.3L stock short block with epp blower cam, ls7 lifters, 243 heads, ARP head studs, ls9 head gaskets

if you were to recommend one of the these two turbos which would you go for? looking for a quicker spool but dont want to run out up top ether

turbo 1.
Compressor Wheel 70mm
.70 a/r
4” Inlet and 2.5” Compressor Outlet
Inducer- 70.15mm
Exducer- 94mm

Exhaust Side:
Exhaust Housing T-4 Flanged Divided
.68 or 1.0
3.0" Vband outlet
Inducer- 64.5mm



or

turbo 2
Compressor Wheel 76mm
.80 a/r
4” Inlet and 2.5” Compressor Outlet
Inducer- 76.71mm
Exducer- 102.36mm

Exhaust Side:
Exhaust Housing T-4 Flange
.96 ar Exhaust Housing
3.0" Vband outlet
Inducer- 74.5mm
Exducer- 65mm

Johnv

Turbo 2 for sure
1st one would be okay for a rear mount.
Is it m6 or A4 ? that will also make some difference to recomendations.

slowlsx

iTrader: (28)

I have a tc78 with 200 miles on it if interested. This one is upgraded to ball bearing and has 68mm turbine

itsslow98

iTrader: (18)

It appears your on a budget so Id go with a turbonetics tc76. If I had to chose though def turbo 2.

ToxicWS6

m6 with 3.70 gears, and budget somewhat, ill look into the tc76 though, slowlsx pm me with price plz