NEW performance CAM/ help me out here???
#1
NEW performance CAM/ help me out here???
Hey I want a cam and ive gotten a lot of responses...
Compcam 224/224 581/581 lift on 112 Lsa
Valve spring- comp cam 918's, make sure the lift is under 600
Or .575lift SDPC
I want something for daily driveing and for raceing every now and then...
I also need to know where to get a good cam with and instilation kit and some valve springs...(is that all I need to put in a cam...cam, install kit, valve springs, pcm tuning,,,what else do i need) anyways i need more suggestions from the guys who have been though this...Also what kind of powergains can I expect from a new high performance cam
HELP ME OUT HERE, THX
Compcam 224/224 581/581 lift on 112 Lsa
Valve spring- comp cam 918's, make sure the lift is under 600
Or .575lift SDPC
I want something for daily driveing and for raceing every now and then...
I also need to know where to get a good cam with and instilation kit and some valve springs...(is that all I need to put in a cam...cam, install kit, valve springs, pcm tuning,,,what else do i need) anyways i need more suggestions from the guys who have been though this...Also what kind of powergains can I expect from a new high performance cam
HELP ME OUT HERE, THX
#2
Launching!
Join Date: Aug 2003
Location: Santa Rosa, CA
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
people are going to tell you to a serch. but i can say right now u need some hardend pushrods. the sdpc cam install kit comes with all the gaskets and pully bolt. other than that u might wanna do some valve seals and/or some Ti retainers. (is this right folks?)