82cetuner

iTrader: (9)

i was chainging valvesprings and putting everythign back together but one of the pushrods was not sitting on the lifter but to the side of it and when I turned engine over by hand to get next pistion at TDC it wedged the pushrod between the lifter and head now I cannot pull the pushrod back out, any ideas on how to get it out without having to pull the head?

SS SLP2

iTrader: (8)

Try hand roll the engine back the other way ?
Johnny

82cetuner

iTrader: (9)

no that didnt work, the lifter did not go back down, but I managed to get it today with some really good vice grips and a crowbar to pry up on the vice grips against the head