eswizz

iTrader: (1)

After racing my car a few weeks in a row, my throw-out bearing is making a lot of noise. I'm looking for suggestions on what slave to get and if I should get a different clutch. My T-56 will need a rebuild as well, at the very least my 3rd gear synchros are shot. Apparently the tranny was beefed up from the previous owner, but we'll see once it is torn apart.
This is my current set-up:
Monster stage 3 clutch(we'll see what kind of condition it's in)
Tick adj master cylinder and remote bleeder
T-56 with upgraded synchros, shift forks

Thanks!

eswizz

iTrader: (1)

Also, my motor puts out about 400 rwhp n/a, and I have a 150 shot I've been spraying. Planning a small turbo setup this winter.

SNLPerformance

iTrader: (15)

If you were the original purchaser of the Monster, send us pics of it and we'll let you know what kind of shape it's in...possibly save you some money on individual pieces if there are any that aren't salvageable.

eswizz

iTrader: (1)

Will do, going to pull the tranny in the next two days. I'd like to start ordering some parts up, what about slave would you recommend?

SNLPerformance

iTrader: (15)

We can get you a new slave too if it wasn't replaced when the clutch went in.

eswizz

iTrader: (1)

Ok so I need a new clutch. Will the Monster level 3 hold up to a turbo? Is that Independence Day sale still available? And I can hear my throw-ut bearing making a ton of noise, that's why I'm pulling the trans in the first place, what do you want for a new slave?

burbalanche

iTrader: (3)

Have a monster 11" ceramic im trying to sell.it only has 150 miles on it.im going to auto in my truck( offroad)..will make u good deal!!

SNLPerformance

iTrader: (15)

Depends on the turbo set up and how much power you plan to make. The sale is still going on, our premium kit includes a slave. Feel free to call me, Chris 817-750-2000