Pontiac GTO 2004-2006 The Modern Goat

H/C/I LS1 M6 GTO track results (vid added)

Old 08-15-2013, 07:59 PM
  #1  
Teching In
Thread Starter
iTrader: (4)
 
6oh-goat's Avatar
 
Join Date: Jun 2010
Posts: 11
Likes: 0
Received 1 Like on 1 Post
Default H/C/I LS1 M6 GTO track results (vid added)

Iv been itching to go to the track for a few weeks now that my car is all lined out and yesterday was a really nice day so i decided to go. Im pretty pleased with the times for my first time out in this car. I went there hoping for anything 11.99 or faster at around 116mph. i got 3 passes in letting it cool down for about an hour in between runs. I just checked the DA for the night and i was surprised to see how low in got here in MO in August. Anyways..... Mods are - custom nitrous cam 231/239 .644/.623 114+2, untouched 243 heads, fast 102/102 setup, pacesetter LT, 3in exhaust on 275/40R17 Hoosier DR. Car made 432whp 388wtq.

1st pass- DA +900 Launched the car around 4000rpms


60ft- 1.866
1/8th- 7.792
mph- 93.59
1/4- 11.959
mph- 117.96


2nd pass- DA +550 Launched around 4500rpms


60ft- 1.740
1/8th- 7.627
mph- 93.77
1/4- 11.786
mph- 118.22


3rd pass- DA +194

Best pass of the night. I launched the car around 5000rpms and if felt like a pretty solid launch so i knew it was gunna be a good pass then i went and messed it all up by missing 4th ;( I was pretty upset i missed a gear during this run.. oh well, im still happy with 11.7s


60ft- 1.680
1/8th- 7.461
mph- 94.46
1/4- 11.75
mph- 114.14




I was on stock 17s with Hoosier Drag Radials... they dead hook at 18psi.. Next time i will try to launch harder (without missing a gear :-/ )and should have the bottle ready for a few passes. Can't wait for that!

Last edited by 6oh-goat; 09-06-2013 at 01:55 AM.
Old 08-15-2013, 08:11 PM
  #2  
TECH Senior Member
iTrader: (2)
 
HCI2000SS's Avatar
 
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 15 Likes on 15 Posts
Default

Great times...especially on the stock 17's! Is the car full weight as well?
Old 08-15-2013, 08:16 PM
  #3  
Teching In
Thread Starter
iTrader: (4)
 
6oh-goat's Avatar
 
Join Date: Jun 2010
Posts: 11
Likes: 0
Received 1 Like on 1 Post
Default

Thanks man, It has the usual weight reduction. Heat shields, V Brace, skid plate, sway bar but that's it. Last time I weighed it with a half tank it weighed 3700 with me in it.
Old 09-03-2013, 11:55 PM
  #4  
TECH Resident
 
jamesSS's Avatar
 
Join Date: Jun 2006
Location: Racine, WI
Posts: 872
Received 0 Likes on 0 Posts

Default

Very nice time! Most don't get near that unless they are spraying. My car has a similar set up and once I get my nitrous to actually fire, should be great. Funny, I am hoping for my time with spray to be yours with N.A.
Old 09-04-2013, 11:16 PM
  #5  
Teching In
 
MrGame's Avatar
 
Join Date: Feb 2008
Location: NJ
Posts: 31
Received 8 Likes on 5 Posts

Default

Great times dude I'm running a similar setup and have been running low 12s in 1400+ DA. Still working on my 60' so there's more in it for sure
Old 09-06-2013, 01:54 AM
  #6  
Teching In
Thread Starter
iTrader: (4)
 
6oh-goat's Avatar
 
Join Date: Jun 2010
Posts: 11
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by jamesSS
Very nice time! Most don't get near that unless they are spraying. My car has a similar set up and once I get my nitrous to actually fire, should be great. Funny, I am hoping for my time with spray to be yours with N.A.
Yeah, i'v had non-stop problems with my nitrous kit. first it was wired up wrong and the fuel noid didnt open (bought blew it up on the dyno) then i switch it up and bought a progressive controller, then my fuel noid was leaking, fixed the leak, then sprayed it and clogged the nitrous jet, then broke the jet fitting off in the plate.. its been a pain lol once i get it lined out is should be worth the trouble its been.

Originally Posted by MrGame
Great times dude I'm running a similar setup and have been running low 12s in 1400+ DA. Still working on my 60' so there's more in it for sure
yeah i was happy with a 1.68 60ft but im hoping to cut better 60s next track visit. maybe i can get a 11.5x slip with a better 60ft.
Old 09-06-2013, 01:57 AM
  #7  
Teching In
Thread Starter
iTrader: (4)
 
6oh-goat's Avatar
 
Join Date: Jun 2010
Posts: 11
Likes: 0
Received 1 Like on 1 Post
Default

a friend only got 1 pass of me that night and, of course it was the one of me missing 4th lol anyways, here it is.

The following users liked this post:
Rickys2003svt.cobra (02-14-2021)
Old 09-19-2013, 10:27 PM
  #8  
On The Tree
iTrader: (1)
 
kline454's Avatar
 
Join Date: Jan 2007
Posts: 145
Likes: 0
Received 0 Likes on 0 Posts

Default

Nice times! I cant wait to get mine to the track, I made 458rwhp trying to run mid 11s!
Old 09-23-2013, 09:21 PM
  #9  
Teching In
 
miahjera04's Avatar
 
Join Date: May 2013
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by kline454
Nice times! I cant wait to get mine to the track, I made 458rwhp trying to run mid 11s!
u shouldnt be having problems gettin into mid 11's with those #'s


Thread Tools
Search this Thread
Quick Reply: H/C/I LS1 M6 GTO track results (vid added)



All times are GMT -5. The time now is 03:11 AM.