What to plug and where to route
09-04-2013, 06:48 PM
#1
TECH Regular
Thread Starter
iTrader: (6)
Join Date: Sep 2012
Location: Austin, Texas
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
What to plug and where to route Trying to find a definitive answer on what to plug, and what to run to my soon to be here (7 weeks later) RX catch can.
5.3 single turbo
5.3 valve covers
ls6 valley
***Still waiting on my catch can, so I have it vented to atmosphere right now using filters.
Current setup:
LS6 valley looped up to TB
Driver side valve cover (OEM PCV valve) has hose on it with filter
Passenger
Passenger side valve cover - rear elbow plugged, front has hose to TB
Filter in Oil cap (I know this is needed even with the can)
crankcrase was overpressurizing before I added the filters, seems fine now, but obviously it's illegal in some states, and not ideal. Just looking for some info on the best way to route everything.
5.3 single turbo
5.3 valve covers
ls6 valley
***Still waiting on my catch can, so I have it vented to atmosphere right now using filters.
Current setup:
LS6 valley looped up to TB
Driver side valve cover (OEM PCV valve) has hose on it with filter
Passenger
Passenger side valve cover - rear elbow plugged, front has hose to TB
Filter in Oil cap (I know this is needed even with the can)
crankcrase was overpressurizing before I added the filters, seems fine now, but obviously it's illegal in some states, and not ideal. Just looking for some info on the best way to route everything.
