Finally got the SS to the dyno for some numbers :)
#1
Launching!
Thread Starter
iTrader: (6)
Join Date: Mar 2009
Location: Horseheads, NY
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Finally got the SS to the dyno for some numbers :)
I finally was able to get the car to the dyno yesterday to get some confirmed numbers. Very satisfied with the end results
Trending Topics
#8
Launching!
Thread Starter
iTrader: (6)
Join Date: Mar 2009
Location: Horseheads, NY
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Single Aero 340 in tank, Racetronix hot-wire kit, stock lines and regulator, FAST rails and Seimens Deka 60's. This winter going to be upgrading pretty much all of that
#10
Launching!
Thread Starter
iTrader: (6)
Join Date: Mar 2009
Location: Horseheads, NY
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Yup for the most part. It's an 02 with the LS6 block, stock 241 heads, rods, pistons, and crank. ARP hardware throughout and all the necessary cam upgrade parts.
Fully forged engine in the works to be swapped in at some point.
Fully forged engine in the works to be swapped in at some point.
#11
Launching!
Thread Starter
iTrader: (6)
Join Date: Mar 2009
Location: Horseheads, NY
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
I should add the car has been at this power level for about 2 full seasons now. I don't drive the car a ton, nice weather only, car cruises and meets and a car show here and there but when I do get it out it always gets played with and beat on LOL.
#13
Launching!
Thread Starter
iTrader: (6)
Join Date: Mar 2009
Location: Horseheads, NY
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Thanks a ton guys much appreciated! No pics right now but I can grab some if you want. The first nozzle is about 8" or so from the TB and the second it about another 6" from the first.
#17
12 Second Club
iTrader: (2)
Join Date: Jan 2011
Location: Old Bridge, NJ/Corpus Christi, TX
Posts: 1,216
Likes: 0
Received 1 Like
on
1 Post
Great job! Told ya you would get 700! I'm gonna run this boost setting on the street with this turbo on my forged 370 with ported lsa heads so now I'm real excited to see what mine makes when it's done...