darkbluez28

i ordered a 9 inch swap housing from quick performance. do i need the short 1350 yoke or the long yoke. ive read some places the short works and someother places the long works. any help is much appreciated. i will be using my stock aluminum driveshaft that uses a 3r and ill be using neapco 2-1153 3r to 1350 conversion u joint. also its an 99 z28 six speed

darkbluez28

someone has to have a 9 inch swap and can tell me what there using with there stock driveshaft

96lt4c4

iTrader: (5)

Long 1350 style Yoke, you will need a conversion u joint to your stock drive shaft.

roy

You can also use a long 1330 yoke and still utilize the 3r joint with your stock shaft.