twin in tank problem (blowing fuse WOT)
10-14-2013, 09:53 PM
#1
9 Second Club
Thread Starter
iTrader: (10)
Join Date: Apr 2006
Location: Oxford, Chester County,Pa
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
twin in tank problem (blowing fuse WOT) I have a twin intank and the entire system is run by a single 20amp fuse built by a well known vendor.
Its a twin intank pump (walbros) the pumps both run at the same time. No hobbs switch. I had the system in another car and was very reliable. I switched cars and moved the system in the same type of car. But now on wide open throttle it blows the fuse. I regrounded the system to make sure it wasn`t a ground issue but still blows under WOT. But just driving around town I have zero issuses.
Any help would be appreciated. I just don't have a clue as to why its doing this now. Thanks guys.
Its a twin intank pump (walbros) the pumps both run at the same time. No hobbs switch. I had the system in another car and was very reliable. I switched cars and moved the system in the same type of car. But now on wide open throttle it blows the fuse. I regrounded the system to make sure it wasn`t a ground issue but still blows under WOT. But just driving around town I have zero issuses.
Any help would be appreciated. I just don't have a clue as to why its doing this now. Thanks guys.
