rockportag03

I've found a few threads where this has been done (installing 4th gen camaro seats into a 1st gen camaro).
Some cut/weld the 4th gen seat tracks and modify them to fit the 1st gen floor while others fabricate brackets that allow the 4th gen seats to simply bolt in. My question is, is there any person or company that is mass producing adapter brackets that allow for this adaptation?

Thanks.

bigarmzz

iTrader: (2)

im curious about this as well

rockportag03

To the top.
Hoping for a response.

reedld

iTrader: (7)

I've never came across any brackets for this.....I adapted my 2nd gen brackets to match up with the 4th gen seats. I used aluminum plate scraps...drilled holes..done. It's really not that hard.

Accrdwgnguy

My plan to fit 4th gen seats to a second gen was to bend/modify the 4th gen mounting tabs as needed and bolt directly to floor.

69 Ghost

Cut the tabs in the back and reweld them on the other side the front location fits. The easiest way is to cut the tabs and bolt them in then bolt in the seats on the front and tack the tabs back on then take them out and weld them.