KATECH LS Valve Covers - Sanded / Prepped for Powdercoat/Polish
10-22-2013, 05:38 PM
#1
Teching In
Thread Starter
iTrader: (18)
Join Date: Jan 2005
Location: S.O.V.
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
KATECH LS Valve Covers - Sanded / Prepped for Powdercoat/Polish Category: Engine - Intake/Fuel
Price: $350
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): AZ
Item Condition: Brand New
Engine: LS1/LS6
LS Engine?: Fits LS Engine
Includes the Valve Covers, Katech Valve Cover Bolts and Grommets, and New GM Valve Cover Gaskets.
Completely sanded and prepped for Powdercoat or Polishing. Or they look great in cast form as well. You have probably seen how rough the casting is on these covers and don't look very good powdercoated without a lot of sanding and prep work. (see blue pic below) There is easily 8 hours sanding time to get them in this condition. I would be willing to bet Katech won't even do this. But these covers will look smooth with powdercoat and the casting will not be seen like in the blue covers below.
Oil fill cap on both sides so you can run breathers or a custom crankcase ventilation setup. They will accept the Katech Coil Relocation Brackets as well.
$350 shipped
Just for clarification, the sanded pic is just showing the work performed. They are bead blasted and ready to be coated as in the first 3 pics.
Last edited by BROCZ; 10-22-2013 at 06:01 PM.
