Race Proven Motorsports C7 Results!!
#2
Added our next round of mods. We installed a Nitrous outlet plate system. Other than that the car is bone stock. Here is the dyno graph on a 50 and 100 shot. This is with only around 700psi Bottle pressure too. We just wanted to see how the LT1 motor liked it... and it LOVED it... Look at that torque!!!!... I did a motor pull also with 3 degrees of timing taken out of the factory tune.
This run is on the 100 shot still with low pressure in the bottle. Stock tires and everything else bone stock
We will have new times in a couple days.
This run is on the 100 shot still with low pressure in the bottle. Stock tires and everything else bone stock
We will have new times in a couple days.
Trending Topics
#10
Made it to the track yesterday with some better prep and some more seat time in the car. Made a couple of passes that i was happy with. Mods are ARH Headers, Tune, and 150 shot on a nitrous outlet plate kit. BFG drag radials. This is the ONLY mods.
Here is the time slips from my best 2 passes of the day.
The pass on the right my bottle was on the empty side. Thats why the MPH is down.. The 60 on that *** was killer and would have been a 10.35-45 if the bottle was full. Headed back next week for some more passes.
Here is the time slips from my best 2 passes of the day.
The pass on the right my bottle was on the empty side. Thats why the MPH is down.. The 60 on that *** was killer and would have been a 10.35-45 if the bottle was full. Headed back next week for some more passes.