Best Nitrous Tuner in Midwest???
#1
Best Nitrous Tuner in Midwest???
I'm looking to add a Nitrous Outlet plate setup to my LS1 GTO MN6; Currently car made 420whp with: K&N Intake, PRC Stage 2.5 LS6 Heads, TSP TorquerV2 cam, Kooks 1 7/8 Headers and Off Road Pipes, SLP LM2 Exhaust.
Since then I've added:
FAST 102mm Intake Manifold
FAST 102mm Throttle Body
DW65c Fuel Pump
(Have not gotten larger injectors yet....looking at something around 40 lb/hr.)
I'd like to hit it with a 150 wet plate from Nitrous Outlet; Car is tuned with HPTuners currently.
Looking for suggestions and/or experiences with Midwest tuners on nitrous....I'm trying to keep this stock cube/stock internal motor from blowing up.
Since then I've added:
FAST 102mm Intake Manifold
FAST 102mm Throttle Body
DW65c Fuel Pump
(Have not gotten larger injectors yet....looking at something around 40 lb/hr.)
I'd like to hit it with a 150 wet plate from Nitrous Outlet; Car is tuned with HPTuners currently.
Looking for suggestions and/or experiences with Midwest tuners on nitrous....I'm trying to keep this stock cube/stock internal motor from blowing up.
#2
I had Straightline Performance tune my trans am. made 520/550 on there mustang dyno with bolt ons and a small 212 221 on a 150 shot. had them set up my suspension also dead hook with 6100 rpm clutch dumps. Good experience there, i will continue to bring my business to them.
Trending Topics
#8
I'd like to get it close to dialed in on the dyno and then will monitor it and make fine tuning adjustments while learning more and more.