Black Nasty

iTrader: (9)

Category: Engine - Intake/Fuel
Price: $1
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): MD
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine

GMPP LS7 intake manifold with a custom installed Nitrous Outlet spray bar kit. Installed by Nitro Dave himself. Topped with a 4150-4500 spacer and a 473225P Wilsons 4500 throttle body. The spacer is port matched to the intake. The nitrous can be set up as dual dry stages or a single wet kit. Very easy to change jets and this kit works! My car has been 5.32 @ 130 in the 1/8 with a best of a 1.16 60ft. Would have ran 8.20s in the 1/4. I also won the True Street class at World Cup Finals @ MIR with this set up. The spray bar kit is considered a "plate kit" so it fits many different class rules and the way it's set up it work like a direct port kit. You can spray as much as 400hp in each side 800hp total. Car made 1098 RWHP with the dual stage set up 88 jet one side and 62 jet in the other and 965 on the single wet kit just a 88n jet.

I also have a set of Areomotive fuel rails and FIC #95 EV3 injectors that I can sell with it for a package deal. Injectors will come with EV3-EV6 adapters so they will work for either connector.

Throttle body cost me $900 shipped
GMPP LS7 intake manifold w/gaskets cost around $400
Nitrous kit was $1200
spacer was $50 plus port match work
Injectors were $600
Fuel rails fittings and hoses were about $350
Total cost me $3500

I will let it all go for $2000 shipped or $1500 shipped with out injectors, hoses, fittings, and rails.

Black Nasty

iTrader: (9)

I also have a cam listed for sale that works very well with this combo.

Black Nasty

iTrader: (9)

I'll throw in a 15lb nx bottle with a nx -6 feed line brackets and bottle warmer with thermostat for an extra $250!