HexenLord

You guys using longer car injectors with truck manifold and rails, what are you using as rail spacers. Looks like I need a 3/4" spacer. Was thinking about using a piece of small PVC tubing but figured I would ask what others were using and where they got it.

JUSTINSWS6

You can make aluminum spacer yourself or order the part. I. Think fast sells the part you are looking for.

HexenLord

I bought some nylon spacers at Lowes. They were like $1.60 for four 5/8" long spacers.

JUSTINSWS6

Nice thats a good solution to it. Let me know how it turms out and Post some pics.

HexenLord

Turned out perfect. Bought some M6 x 1.00 x 40 bolts, small pack of M6 x 1 washers, and 5/8" nylon spacers. Everything fit like a dream. Tighten down the bolts until the nylon spacers squeak and you're done. I'll grab pics later. Was $4 for bolts/washers/spacers at local lowes. I thought about grabbing a few extra sets for people that might need them. Fitment is perfect and the rails are as steady as stock.

cpolaris502

iTrader: (2)

That's exactly what I did too, very cheap and simple.