The best place to get a low profile oil pan ?
#1
The best place to get a low profile oil pan ?
Is this still the cheapest place to get a muscle car oil pan? ( it was reccomended in some older build threads)
http://www.jegs.com/i/Chevrolet+Perf...12593/10002/-1
http://www.jegs.com/i/Chevrolet+Perf...12593/10002/-1
#3
#4
Teching In
iTrader: (4)
Join Date: Oct 2013
Location: NW GA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
With that pan you can run into clearance issues. A friend of mine has one on his Chevelle, and it hangs down a good 2.5 inches below the crossmember, but it works. I just used the new Holley pan on a swap, and I couldn't be happier.
#5
TECH Senior Member
iTrader: (12)
+1, was going to inform himn of that.. but he was only asking for a place to buy the pan..
Use the Holley 302-2 pan !.. I just got one for my Chevelle.. I had a CTS-V pan, it hung 1" below the crossmember. I bottomed out on it and cracked it. So 2.5" is going to be a lot.
I am currently running a leaky notched F-Body pan. .plan to swap the Holley in within the next two weeks.
BC
Use the Holley 302-2 pan !.. I just got one for my Chevelle.. I had a CTS-V pan, it hung 1" below the crossmember. I bottomed out on it and cracked it. So 2.5" is going to be a lot.
I am currently running a leaky notched F-Body pan. .plan to swap the Holley in within the next two weeks.
BC
Trending Topics
#8
You might still have fitment issues though.
#10
TECH Fanatic
iTrader: (23)
+1, was going to inform himn of that.. but he was only asking for a place to buy the pan..
Use the Holley 302-2 pan !.. I just got one for my Chevelle.. I had a CTS-V pan, it hung 1" below the crossmember. I bottomed out on it and cracked it. So 2.5" is going to be a lot.
I am currently running a leaky notched F-Body pan. .plan to swap the Holley in within the next two weeks.
BC
Use the Holley 302-2 pan !.. I just got one for my Chevelle.. I had a CTS-V pan, it hung 1" below the crossmember. I bottomed out on it and cracked it. So 2.5" is going to be a lot.
I am currently running a leaky notched F-Body pan. .plan to swap the Holley in within the next two weeks.
BC