a4ls2goat

looking for a turbo cam for a small displacement motor(4.8)

Ls9 preferably, maybe ls6, or custom

lmk, thanks

MrEracer

iTrader: (3)

If you're looking for a true turbo cam that limits cylinder contamination from back pressure I have what you need. This cam will let the turbo do it's job and let the engine develop boosted power without the negative effects of overlap and reverse flow. This cam will purr like a kitten on the street and roar like a lion on boost. Spec's are as follows:

Intake lift and duration: .557 lift/ 231 duration @ .050
Exhaust lift and duration: .564 lift / 210 duration @ .050
LSA 121 degrees

This is a Gen IV cam and requires the cam sensor on the front cover. $250 shipped. Contact me if interested.

MrE

runninfromthelaw

iTrader: (22)

I have a new ls9 cam, it was installed but never ran. Let me know if your interested.

supersick99z

iTrader: (66)

Have a 04+ Z06 cam