Punisher (98 Z28 Build)
#1
Punisher (98 Z28 Build)
It all started with a "friend" wrecking my 98 NBM SS M6. Frame got bent so all the good parts were salvaged for this new roller I picked up from xpeditious. When I picked up the roller, it was painted flat black, sported a moser 9", wiring/pcm/coils relocated and gutted, good suspension and converted from manual to auto. It also used to be a turbo car. So basically im swapping my motor/trans in and added all my parts to it.
Heres whats going into it.
Engine: 383 LS1, lunati forged roatating assembly, double roller t-chain, AI CNC Ported/Milled 243 heads, 58CC chambers, AI Custom Grind, ARP 12pt head and main studs, Super Victor intake. Getting a fogger and plate installed on the victor, and a Q850 E85 carb from quick fuel.
Trans: Th400, Reverse manual, t-brake, 3600 stall fti sst 9" converter, billet flexplate.
Rear: Moser 9", Spool, billet axles, 3.55s
Parts list is too long, now with the pictures.
When I picked up the car...
Now the Progress
Heres whats going into it.
Engine: 383 LS1, lunati forged roatating assembly, double roller t-chain, AI CNC Ported/Milled 243 heads, 58CC chambers, AI Custom Grind, ARP 12pt head and main studs, Super Victor intake. Getting a fogger and plate installed on the victor, and a Q850 E85 carb from quick fuel.
Trans: Th400, Reverse manual, t-brake, 3600 stall fti sst 9" converter, billet flexplate.
Rear: Moser 9", Spool, billet axles, 3.55s
Parts list is too long, now with the pictures.
When I picked up the car...
Now the Progress