Help with CAM plz
#1
TECH Addict
Thread Starter
Join Date: Feb 2004
Location: Michigan
Posts: 2,335
Likes: 0
Received 0 Likes
on
0 Posts
Help with CAM plz
I am getting a 2800 to 3200 stall Torque convertor and have been doing reading here and else where. I have not been able to determine how I should handle it.
I know I want a daily driver and that is why I am doing a 2800 to 3200 (I will not go higher) stall. And the CAM should work with same. I plan on addl like new springs and rocker arms and possbl push rods. The trans will have a cooler and possbl oil cooler. And tuning when I am done.
I want more HP while keeping low end torque but better 1/4 miles and ability to beat most anything stock on the street.
What size CAM should I do?
I know I want a daily driver and that is why I am doing a 2800 to 3200 (I will not go higher) stall. And the CAM should work with same. I plan on addl like new springs and rocker arms and possbl push rods. The trans will have a cooler and possbl oil cooler. And tuning when I am done.
I want more HP while keeping low end torque but better 1/4 miles and ability to beat most anything stock on the street.
What size CAM should I do?
#7
TECH Addict
Thread Starter
Join Date: Feb 2004
Location: Michigan
Posts: 2,335
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by foff667
all cams run between $350-420 unless you buy used...i wouldnt worry about a $50-70 price difference on something like a cam...pick something based on your wants & needs.
Thanks, this was what I needed to know