Who's made a custom ORY? I need a parts list
05-02-2014, 11:39 AM
#1
Launching!
Thread Starter
iTrader: (18)
Join Date: Nov 2004
Location: Richmond, Tx
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Who's made a custom ORY? I need a parts list I need to make a new ory for my car since the hooker ory I have now is hitting the MWC tq arm crossmember I have now. The only exhaust shop near me "1 hour drive" quoted me $200-$300 for a custom y without mandrel bends. With mandrel bends would be significantly more. I didn't even bother. I decided to try and make my own. I'm looking for a list of parts to buy. I was thinking I would need a few 45 degree bends and some 90 degree bends, but after seeing the cost I think I should be able to get away with just buying a couple of U-bends. I already have a flowmaster 3" to 3.5" merge. What parts would you guys suggest?
05-08-2014, 01:58 AM
#3
Launching!
iTrader: (1)
Join Date: Nov 2004
Location: Jax, FL
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
I'd go to the local crafts store and buy some cardboard tubes to mock everything up and then you can get a good idea of the bends and pipe lengths you will need.
Other stuff...
Band clamps
Pipe expander
Welder
Rods
Mounts
Chop saw
Misc. Stuff
Other stuff...
Band clamps
Pipe expander
Welder
Rods
Mounts
Chop saw
Misc. Stuff
