17" C5 Z06 Replicas with M&H Racemaster Drag Radials
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: albany ny
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
17" C5 Z06 Replicas with M&H Racemaster Drag Radials
Category: Wheels & Tires
Price: $515
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): NY
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4
LS Engine?: Fits LS Engine
(2) 17"x9.5" Chrome C5Z06 Replicas with 325/45r17 M&H Racemaster 28" Tall Drag Radials
Last edited by psi2high; 06-17-2014 at 08:32 PM.
Trending Topics
#12
12 Second Club
FYI for potential buyers, These WILL NOT fit on a C5Z @ stock height without modification of the inner wheel well let alone a lowered C5Z... Not bashing the setup just informing C5 owners.... Not sure on a Fbody though...
#13
All you have to do is trim the plastic inner fender liner on a c5, and clearance the inner body of the quater on a fbody. It's about a 40 minute process. I did not have to roll the lip on the quater on my camaro which is lowered on eibach sportline springs. FYI, not to be a jerk but I'm not trying to pull one over on any potential buyer. When I say it fits Corvettes and Camaro's, I'm talking about the replica wheel in general; bolt pattern, offset etc. Potential buyers in the car game should be aware that a 28" tall tire that's 11.50" wide are going to need to be clearanced. Here's a lowered c5z with them