LT4 Hot Cam Kit
#4
It does not with my cam I purchased other push rods and am using the 1.6 rockers. Everything is new only difference in the kit I am selling is push rods instead of rockers.
Trending Topics
#11
11 Second Club
iTrader: (1)
So I went to Summit's website.
The cam alone is $220.
The "HOT" kit springs are $43.97, the retainers are $17.97 but stock could be reused. The springs are marginal with the heavier LT1 valves.
So that is within $65-70 of your asking price and those don't look like $70 pushrods to me and I did NOT look around for a better deal on these parts just full normal retail at Summit.
So the seller is the only one getting a "good deal" on that box of parts.
The cam alone is $220.
The "HOT" kit springs are $43.97, the retainers are $17.97 but stock could be reused. The springs are marginal with the heavier LT1 valves.
So that is within $65-70 of your asking price and those don't look like $70 pushrods to me and I did NOT look around for a better deal on these parts just full normal retail at Summit.
So the seller is the only one getting a "good deal" on that box of parts.
#13
TECH Fanatic
iTrader: (6)
The roller rockers are the expensive part but the BUZZKILL would be that they're SA. So you get a kit with a lazy cam, rockers that will become useless if you ever upgrade, and unusable valve springs for $5hundredwhatever dollars. After looking deeper into it I realized the entire kit is crap IMO.
#14
11 Second Club
iTrader: (1)
Besides being SA the supplied rockers are only rated to .575 and these days a LOT of folks are running more on the street.
The LT4 springs are a very nice choice for an LT1 with stock cam and 1.6 rockers so I wouldn't call them useless. I would call them a poor match to the HOT cam and heavier LT1 valves.
The LT4 springs are a very nice choice for an LT1 with stock cam and 1.6 rockers so I wouldn't call them useless. I would call them a poor match to the HOT cam and heavier LT1 valves.
#15
Another faceless troll w/o any profile looking to profit from unaware/unwise forum members. Too bad we dont have moderators that make an effort to protect us. Something like looking at the trolls MAC address and exposing who he really is. We may be surprised its a frequent participant here.
#16
All I was trying to do was sell my cam kit I bought not trying to scam anyone. This fourm is full of people who are the biggest *** holes. I will not be visiting this forum again. You all can go **** yourselfs.
#17
TECH Addict
I know you're learning a lot about your car here and some people here think they are gods gift to cars, don't let them bother you. The frequency of those people are even worse here than any other forum I visit though.
Others here are just blatantly honest and tell it like it is without any filter. And if you can't take that you need to grow thicker skin, cause they certainly aren't going to change.
Good luck with the sale.
#18
TECH Addict
Another faceless troll w/o any profile looking to profit from unaware/unwise forum members. Too bad we dont have moderators that make an effort to protect us. Something like looking at the trolls MAC address and exposing who he really is. We may be surprised its a frequent participant here.