Kinsey

Category: Engine - Power Adders
Price: $6500
Part Fits: 2010+ Camaro
Location (State): AL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine

Up for sell is a SLP TVS2300 Comes with the following:

Out to the side is rough cost I paid for each.

TVS2300, All lines and heat exchanger and pump. Everything that came in the box to install it. 6600.00
OD Cog and extra belt 350.00
Stock 1:1 rear pulleys with belt.
FIC 60lb injectors 550.00
RDS 1/2 spacer and injector spacers installed 550.00
Magnuson ported lower manifold installed 325.00
JRE super tensioner 340.00
CAI Air intake. Tapped for dual meth nozzles 300.00
Stock 3.8 pulley (8psi) 3.6(10psi) 3.4(12psi). With the OD cog installed. -3psi with stock rear pulleys. 200.00
2 Gates belts for 3.4/3.6 pulley 1 of 3.8
Valley pan. Blower will fit L99 or LS3.

Total $9,215.00



I'm sure I'm missing something. But you will get everything listed and anything I might have missed. It will be ready to install. You can save a lot of money on this. The Spacer and manifold is not an easy install and it's already done for you.

Only thing wrong with blower is a few scratches which you can see in the pictures. Got scratched putting the spacers and manifold on.

Had the car on the Dyno last week and made 643hp/619tq. Cars Auto.

Love the blower But pushed it as far as I want to push it. Time to move on to a F1. Going to miss the insta torque of this blower. Car full weight runs 6.70's 1/8/ 8.70's 1000ft. 1.53 60ft.

If your going to buy a Maggie you will need all these parts sooner or later. Here you get it all at once. Just bolt it on.


6500.00 Shipped

PM with any questions.

Nitroman30 on Ebay
Nitroman28 on Camaro5