amadeus

I did the dreaded 3-2 shift, and i hear a slight ticking. So today i plan on pulling pushrods and replacing etc. My question is am I suppose to use loctite and re-torque to 22ft lbs? Im hoping its only pushrods, anyways thank you.

badls1

iTrader: (1)

I wouldn't use loctite on the rockers. 22 lbs should be fine. check all the rocker arm make sure its okay if you have an bent pushrod.

Steve Burger

iTrader: (33)

With ported heads blue locktite seals the threads so oil does not leak into the ports. If stock heads then no.

amadeus

thanks guys