414 Lsx nitrous race motor all pro heads never ran
08-18-2014, 08:03 PM
#1
On The Tree
Thread Starter
iTrader: (42)
Join Date: Oct 2006
Location: ruston, la
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
414 Lsx nitrous race motor all pro heads never ran Category: Accessories
Price: $10000
Location (State): LA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine
6.0 block
Callies comstar crank and rods arp 2000 rod bolts
Diamond dome piston have side coating and top coating
Solid roller cam shaft
All pro heads brand new
T&d rockers
New double roller timing chain
New oil pump
Moroso pan
Motor was built for 500-600 shot of nitrous on spray should make about 1300-1400 hp this was a motor I wanted for a long time but at this time just can't finish it, it will need intake we where going to run mast intake with 4500 tb. Will need valve covers and balancer. Motor is still at futrals on the stand, I have little over 14k in it right now I'll let it go for 12k text me a 3182653774 or pm me, I don't get on her much kindof got out of the whole racing thing. Only trade I would might would consider is a polaris ranger 900. Will consider offers as long as they are low ball offers and I don't have to sell it I might would finish it one day
Last edited by camaroboy869592; 08-24-2014 at 09:50 AM. Reason: Added to post
08-19-2014, 04:45 PM
#2
I have a 414 Futral Motorsports built motor
6.0 block
Callies comstar crank and rods arp 2000 rod bolts
Diamond dome piston have side coating and top coating
Solid roller cam shaft
All pro heads brand new
T&d rockers
New double roller timing chain
New oil pump
Moroso pan
Motor was built for 500-600 shot of nitrous on spray should make about 1300-1400 hp this was a motor I wanted for a long time but at this time just can't finish it, it will need intake we where going to run mast intake with 4500 tb. Will need valve covers and balancer. Motor is still at futrals on the stand, I have little over 14k in it right now I'll let it go for 12k text me a 3182653774 or pm me, I don't get on her much kindof got out of the whole racing thing. Only trade I would might would consider is a polaris ranger 900. Will consider offers as long as they are low ball offers and I don't have to sell it I might would finish it one day
6.0 block
Callies comstar crank and rods arp 2000 rod bolts
Diamond dome piston have side coating and top coating
Solid roller cam shaft
All pro heads brand new
T&d rockers
New double roller timing chain
New oil pump
Moroso pan
Motor was built for 500-600 shot of nitrous on spray should make about 1300-1400 hp this was a motor I wanted for a long time but at this time just can't finish it, it will need intake we where going to run mast intake with 4500 tb. Will need valve covers and balancer. Motor is still at futrals on the stand, I have little over 14k in it right now I'll let it go for 12k text me a 3182653774 or pm me, I don't get on her much kindof got out of the whole racing thing. Only trade I would might would consider is a polaris ranger 900. Will consider offers as long as they are low ball offers and I don't have to sell it I might would finish it one day
08-21-2014, 01:24 PM
#4
so your saying thins motor makes 800 to 900 all motor then? find that hard to belive plus if you want real offers give more information. Im not saying with a solid roller it cant hit 800hp but to spend that kind of money people will want some proof. and the bore and stroke information would be important as well. compression specs on heads, valve sizes and all if you want 12k for a engine
08-22-2014, 06:36 AM
#5
On The Tree
Thread Starter
iTrader: (42)
Join Date: Oct 2006
Location: ruston, la
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
If somebody is serious about the motor I can give them all the info they need but there is no way to get proof of what hp this engine makes because it is brand new still on the stand yes we est around 700-800 on motor and 1300 on spray maybe more maybe less, bore is 4.60 stroke is 4.0 had 6.125 rods it will have to double check on valve size but anybody that knows about all pro heads they know it's the best head out there for ls motors the heads with no springs where 6500 if that tells you anything
Trending Topics
08-24-2014, 10:09 AM
#10
On The Tree
Thread Starter
iTrader: (42)
Join Date: Oct 2006
Location: ruston, la
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
no im not in Hawaii I posted this with my phone and it didn't do it right, sorry, if I remember right they are the all pro 232 cnc heads ill have to get with allan to get all the specs I paid for this motor almost two years ago so kindof lost interest and forgot what all the specs where, its been built about 6 months maybe.
