4L80e input shaft stripped
#1
Registered User
Thread Starter
Join Date: Oct 2014
Location: Geelong, Victoria, Australia
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
4L80e input shaft stripped
Hi guys new to the forum
Recently purchased a 4l80e and just stripped it down too put one of Jakes Performances stage 2 kits through it,
Have got the input shaft as pictured here...
https://www.dropbox.com/s/xyacicmq737z7ba/IMAG0190.jpg?dl=0
https://www.dropbox.com/s/73c5ervafkq2h05/IMAG0191.jpg?dl=0
Was just wondering what would be the main cause of this?,
I will now be putting a billet replacement piece in but wanted too know if there was anything else that I should know as it will be going onto a Twin Turbo LS1 with 700hp at some stage in its life
Thanks guys
Recently purchased a 4l80e and just stripped it down too put one of Jakes Performances stage 2 kits through it,
Have got the input shaft as pictured here...
https://www.dropbox.com/s/xyacicmq737z7ba/IMAG0190.jpg?dl=0
https://www.dropbox.com/s/73c5ervafkq2h05/IMAG0191.jpg?dl=0
Was just wondering what would be the main cause of this?,
I will now be putting a billet replacement piece in but wanted too know if there was anything else that I should know as it will be going onto a Twin Turbo LS1 with 700hp at some stage in its life
Thanks guys