monte383sbc

iTrader: (15)

iam stacking up the forward and direct drums in my th400 and to my correct clearance I would have to use a few . 068''s with .077''s and a .092'' steels or do some machine work, my question is a .068 steel to thin and prone to worpage in the forward and direct drums? I was always told never to go less then .070'' on the steels. any help is appreciated thanks matt

SnIpEz

iTrader: (4)

It will be fine

PBA

As long as you are using the Hi-Energy clutches, you will be fine. Warpage only occurs when the clutch burns, not the other way around.