F/s 2000 trans-am
12-22-2014, 08:43 AM
#1
LS1TECH Sponsor
Thread Starter
iTrader: (9)
Join Date: Nov 2005
Location: LUBBOCK T.X.
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
F/s 2000 trans-am Year: 2000
Make: Pontiac
Model: Trans Am
Price: $22500
Mileage: 72212
Private or Dealer Listing: Private Listing
Location (State): TX
Color: Black
Transmission: Manual
Drivetrain: Rear Wheel Drive
Interior &Exterior: black on black, welded in 6-point cage w/ swing out side bars, and brand new acc carpet
Engine: lsx block 398 cid 4.185 bore 3.622 gm crank, callies h-beam rods, wiseco pistons w/ akerly & childs rings 11.78:1 compression. Clevite main and rod bearings, durabond cam bearings, katech timing chain, ported and coated oil pump, ls7 lifters, manley pushrods, powerbond balancer, and a super stick 1 cam 236/248 dur@.050 .601/.615 lift 112, also has cnc ported ls3 heads with dual springs, stainless hollow stem intake valves and sodium filled exhaust valve, has ls3 intake with a nick williams 92mm t/body and c5 maf with a k&n cai.
Transmission: 6-speed manual w/ls7 clutch kit, tick remote bleeder, and Tick/Tilton adjustable master cylinder.
Exhaust: edelbrock race headers with o/r y pipe, cut-out, and magnaflow muffler.
Suspension: umi tubular k-member w/ upper and lower control arms, edelbrock pro touring kit ( swaybars, lower control arms, adj. coil overs fronts, w/edelbrock non-adj rears, and eibach springs front and rear). bmr adjustable pan hard bar, torque arm w/ torque arm relocation kit and driveshaft safety loop. T/A rearend girdle with main cap stud kit. Along with CTS-V front calipers and pads with c6 zo6 rotors.
Wheels and Tires: chrome c6 zo6 split spoke 18" fronts and 19" rears, Hankkook ventus v12 evo 275/35/18 fronts & 295/30/19 rears. will also throw in a matching set of wheels wit 275/40/17 m/t et street drag radials and a pair of 305/30zr 19" rs3 tires brand new.
MISC: be cool direct fit radiator, moroso oil accumulator, permacool oil cooler, and a taylor battery relocation kit.
For any questions please contact him...
