Need Injector Data for Deatschwerks 105 lb 1103cc injectors
#1
10 Second Club
Thread Starter
iTrader: (5)
Join Date: Aug 2012
Location: NW Indiana
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
Need Injector Data for Deatschwerks 105 lb 1103cc injectors
Hoping someone can help me out. I bought a set of these injectors off this site and I need injector data for Deatschwerks 105 lb 1103cc injectors. I never had an issue with obtaining technical information from Deatschwerks before but for some reason they claim they don't have the data for these injectors because they are 3-4 years old.
Anybody have any injector data for these? Tuning with HP Tuners. Thanks!!!
Anybody have any injector data for these? Tuning with HP Tuners. Thanks!!!
#4
TECH Fanatic
iTrader: (44)
http://www.hptuners.com/forum/showth...ks+105+lb%2Fhr
This is all I could find thus far. Maybe this will get you going in the right direction.
This is all I could find thus far. Maybe this will get you going in the right direction.
#5
TECH Fanatic
iTrader: (44)
https://www.dropbox.com/s/g089z5pv7u...016mx-1200.xls
DW sent me this, which is the data to go with their 115 lb/hr injectors. However, they told me that they did not provide that data even when they were still selling those injectors.
DW sent me this, which is the data to go with their 115 lb/hr injectors. However, they told me that they did not provide that data even when they were still selling those injectors.
#7
I have the data sheet from mine (PN 22U-01-0105-8). Let me know what you're looking for and I can look it up. Mine flowed an average of 98.2lbs/hr @ 43.5 psi. The fuel pressure correction shows mine flow 105.2 lbs/hr at 50.0psi, which is where I have my FPR set at.
Latency data (@3bar supply pressure) is showing:
1.8ms@12V
1.6ms@13V
1.5ms@14V
1.4ms@15V
Latency data (@3bar supply pressure) is showing:
1.8ms@12V
1.6ms@13V
1.5ms@14V
1.4ms@15V
Trending Topics
#8
10 Second Club
Thread Starter
iTrader: (5)
Join Date: Aug 2012
Location: NW Indiana
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
I don't have the part number on me. We've been tuning using ID data but I don't think its quite right yet. Can you email me a pic of the sheet? Markalan454 @ gmail .com