Wix Corvette Regulater / Outlet Part #
02-04-2015, 07:58 PM
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Jan 2013
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Wix Corvette Regulater / Outlet Part # So I bought a Wix Corvette Regulator for my LS1 swap. I decided to use nylon fuel lines. The outlet looks like a whopping 1/2" push in type fuel line. Anybody have a part number to convert this to a 3/8" barbed end for nylon lines and a clamp?
02-10-2015, 10:10 PM
#2
Staging Lane
iTrader: (3)
Join Date: Dec 2014
Location: West Texas
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
fuel filter Can you post a pic of what you have? I have used these before on LS swaps and don't remember any of the three fittings being larger than 3/8".
IIRC there is a 3/8 inlet, 3/8 outlet and either a 5/16 or 3/8 return. All of them with the factory style barb fitting for push on type plastic keepers.
Or are you saying your nylon line has the 1/2" fitting?
IIRC there is a 3/8 inlet, 3/8 outlet and either a 5/16 or 3/8 return. All of them with the factory style barb fitting for push on type plastic keepers.
Or are you saying your nylon line has the 1/2" fitting?
02-11-2015, 01:26 AM
#3
The outlet is for a 3/8" hard line.
You can connect it to the nylon line with something like this
http://www.summitracing.com/parts/rnb-800-155
You can connect it to the nylon line with something like this
http://www.summitracing.com/parts/rnb-800-155
