GAME OVER

just curious to see what you would need for a stock t/a or camaro ls1 to beat a vette??
also what would it take to beat the z06er???

jrp

iTrader: (16)

to beat it in what? a roll, the strip, autocross, ect? all you need is a stock t/a or camaro to beat a vette at the strip. some bolt ons would wring in a zo6.

2_wacko

iTrader: (2)

So does that mean a few bolt on's will beat a 03 cobra?

BADFNZ-383

iTrader: (41)

i would say if you are a dam good driver, and the cobra didnt have much more than an average driver, it would be very possible to beat an 03 cobra with just bolt-ons.

Tiger2o69

iTrader: (16)

My friend beat an C5 saturday by a half carlenth. He had a catback and pulley on this 99 t/a. C5 was a stock 01.

Tiger2o69

iTrader: (16)

I understand that the vette and f-body cars have the same engine but why wouldnt they vette win? Isnt it lighter and have a few extra things done to it stock?

Danny2tek

iTrader: (1)

Their drivetrain (IRS) has a little bit more of loss

Tiger2o69

iTrader: (16)

oic thanks

H82BBad

come on with a poor driver maybe.

I love f-body's and it is my current car of choice but I also owned Vettes before.

My vette with a nittoe 555's (Non Drag Radials) and an aftermarket airbox. (and Andy exhaust bypass)

went 12.44@115
I never had an f-body come close to my basically stock times.

BTW the car in question was a 99 hardtop vette. times were ran in Bowling Green.

Assassin

iTrader: (3)

the Z06's are fast as heck......... if you know how to drive, I've walked a few but after test driving one I know that the driver's must suck, I put that thing through the ringer and its very impressive, I think without my n2o the Z06 would be faster, but as far as modding to beat them, you could spend $600 on n2o, or about $2500 for heads, cam, headers package, not including computer tuneing and converter or clutch, but your still stuck with the shitty 10bolt, so thats another 2500 - 3k........ BUT... you could beat them w/ just a cutout if they arent very skilled drivers, and that would def. make them feel stupid.....

TX_SS

iTrader: (4)

what about..
C5 auto (STOCK) vs WS-6 M6 (LID, cutout)???
who would win..if the drivers were equally the same?
from a dig and roll.. around 55mph.

i need to know..cuz im racing one..this weekend..

skunk50

man, enough with the bad driver hypothesis. it's getting really gay. lol.

minivette

"Some bolt on's" aren't going to get you in Z06 territory. Sorry.

steelsnow

****, i kept up with a stock z06 with my mods. pre ls1 edit and clutch. with 3 people in the car. must not take a lot!!

minivette

I would take "some bolt on's" as meaning nothing internal.